The Clone Gold Prospect is situated 20 km southeast of Stewart, BC and about 15 km south of Seabridge Gold Inc.'s Red Mountain gold deposit.

The property features two types of gold-bearing shear zones, exposed over a strike length of approximately 600 metres. These shears called either H or S zones (hematite or sulfide) can carry high-grade gold values. Trench #4 into the H-1 structure returned a value of 3.59 oz/ton gold over a 5.5m width; trench #10 into the S-2B structure returned 2.1 oz/ton gold over 4.5m.

Plans for the 2008 drilling program call for further testing of the S-2B structure, following up on two holes drilled by Canasia in 2006. These holes returned intercepts grading 0.114 oz/ton gold over 4.9m and 0.178 oz/ton gold over 10.8m. Drilling of the H-1 structure, 100m west of the 2003 hole which ran 2.36 oz/ton gold over 8.5 m, is also planned.

Graeme Sewell, a director of Canasia stated, "Management is pleased to be starting the 2008 summer drill program on the Clone Gold Property."

Dino Cremonese, P. Geo, the qualified person under National Instrument 43-101 for this project, has reviewed the technical content of this news release.

If you would like to be added to Canasia's news distribution list, please send your email address to info@canasiaind.com.

Graeme Sewell, Director

Canasia Industries Corporation

Contacts:Canasia Industries CorporationGraeme SewellDirector1-877-428-8848(604) 689-1733 (FAX)Email: info@canasiaind.comWebsite: www.canasiaind.com